780.434.8778 info@frank-henry.com

Pumps

 


Mission 2500 Supreme Centrifugal Pump

Please Note


All pumps are pressure tested and certified at Frank Henry’s shop before they are shipped.

 

  1. Thick, strong concentric casing with replaceable  casing  wear pad provides extended life over conventional volute The concentric  design minimizes turbulence and abrasive wear. The wear pad allows the casing to be repaired at a lower cost than replacing the entire casing.
  1. Wide semi open impeller creates lower axial thrust for improved bearing The semi open design reduces the concentration of solids behind the impeller extending the life of the mechanical seal or packing and stuffing box.

 

  1. Casing gasket recessed for Replaceable stuffing box cover with dual stuffing box bolts.

1. Thick, strong concentric casing with replaceable casing wear pad provides extended life over conventional volute designs. The concentric design minimizes
turbulence and abrasive wear. The wear pad allows the casing to be repaired at a lower cost than replacing the entire casing.
2. Wide semi open impeller creates lower axial thrust for improved bearing life. The semi open design reduces the concentration of solids behind the impeller extending the life of the mechanical seal or packing and stuffing box.
3. Casing gasket recessed for protection. Replaceable stuffing box cover with dual stuffing box bolts.
4. Optional stuffing-boxes available for single and double mechanical seal applications and can be
configured for flush lines.
5. Long-life no-adjustment mechanical seal available for near zero leakage.
6. Replaceable shaft sleeve prevents shaft wear.
7. Single row roller bearings for increased bearing life.
8. Oil lubrication for bearings is available upon request and
recommended for pump speeds in excess of 2400 RPM. Duplex angular contact bearings eliminate shaft end play and increase bearing and seal life.
9. Labyrinth seals for maximum bearing protection are standard. Lip seals are recommended for oil- lubricated pumps.
10. Optional flanged bearing housing available for hydraulic drive.
11. External adjustments of impeller clearance extends pump performance life.
12. Large heavy-duty shaft reduces deflection for longer life of packing and mechanical seals.Solid base offering rigidity and strength.
13. Casing jack bolts simplify casing removal.
14. Replaceable casing wear pad.
15. Easy accessible front access drain.
16. Back vanes reduce collection of solids at stuffing box and reduce box pressure.
17. Smooth impeller eye for minimum turbulence and higher efficiency.
18. Full pipe diameter entrance for minimum turbulence and maximum efficiency.

* Frank Henry services most pumps and carries a large inventory of parts!


Mission Versatile Drives & Mounting Options

1 . Top Mount Belt Drive

Requires the least amount of floor space with its small foot Belts to the right are standard, to the left are a special order. Pump speed can be changed by changing sheave size.

2. Direct Connect Unit

Fabricated on a steel rigid in line base, it uses more floor space than the Overhead version but provides a lower

3. Close Coupled | Space Saver Electric

Require the least amount of cubical space and eliminates coupling and alignment

4.  Horizontal Diesel

Complete with full instrumentation, batteries and fuel

*Available upon request.


Type “S” 1 1/8” Pump

Parts List


Type “W” 1 1/7” Pump

  • Greater Head Recovery
  • High Shear & Low Pressure Assembly
  • Optional Size Hoppers

Mud Hoppers & Mud Guns

  • Greater Head Recovery
  • High Shear & Low Pressure Assembly
  • Optional Size Hoppers
  • The rubber nozzle increases the life of the mud mixing pump by preventing large increases in mixing gun volume which often causes cavitation
  • The rubber nozzle increases nozzle life 10-20 times over mild steel
  • Offers maximum blending, agitation and pick up of settled solids
  • All swivel joints have grease fittings
  • Ball bearings and seals are easily replaced

Frank Henry Self- Priming Pump

  • After initial priming, they will continue to re-prime automatically
  • A semi-open impeller design is ideal for trash and solids handling and will handle various types of pumpages
  • Solids handling will handle up to a 3” spherical solid
  • Unitized pumps are available with electric motor or engine driver
  • 17-4 PH Shafting
  • External shimless impeller / wear plate adjustment
  • Semi-cartridge mechanical seal
  • Removable cover plate
  • Viton O-Rings
  • Modular SAE mount available for 4”- 10” pump sizes
  • Removable rotating assembly