products

Instrumentation – Wireline

Measuring Wheels

  • Single and Dual Line sheave wheels
  • Centre sheave wheel inserts for different line sizes and for extra lines
  • 90-degree drive for direct cable attachment for manual depth counter (taking the place of a triple standoff)
  • Encoder mounting bracket for electronic depth and speed systems (available at FHC)
  • Standard pin hole sizes for hydraulic or electronic weight indicator load cell
  • Custom requests for overhead mounts or floor mounts
  • 10,000 lbs to 40,000 lbs capacity

OCSD Portable Dynamometer

FHC M Load Cell

FHC G Load Cell

Digital Dial With Posi- Drive Pointer

Model 565 D Digital Weight Indicator

Model C06 Pancake Load Cell

Model FHC 15K Pacman Load Cell

Model FHC LTX 150K Load Cell

Model FHC C05 Load Cell

MHD-47 Measuring Head

Measuring Wheels

MHD-47 MEASURING HEAD

  • Measuring wheels for 1 ft and 1/3 m circumference are available
  • Designed for one or two lines up to 5/16″ diameter
  • Load cell capacity up to 10,000 lb / 4,536 kg line pull
  • Shaft connections included for encoder and/or mechanical counter
  • Tools not required to change lines
  • Guides rollers at front & back
  • Guides rollers at front & back
  • Compatible with Reliable Scale Corporation Digital Dial series indicator with tension, depth and speed monitoring

OCSD Portable Dynamometer

FHC M Load Cell

FHC G Load Cell

Digital Dial With Posi- Drive Pointer

Model 565 D Digital Weight Indicator

Model C06 Pancake Load Cell

Model FHC 15K Pacman Load Cell

Model FHC LTX 150K Load Cell

Model FHC C05 Load Cell

MHD-47 Measuring Head

Measuring Wheels

  • Resolution, sensitivity, and increments are user programmable
  • Low profile indicator uses minimal “dashboard” space
  • Responsive analog output (4-20mA or 0-5VDC) tracks the digital display
  • Output Ports provide multiple alarms for equipment shutdowns
  • Real time clock provides time and date with weight for computer interface
  • Field programmable for use with most strain gage load cells and transducers
  • High-speed sampling for quick and accurate response to weight changes
  • Over/High/Low alarm outputs for system overload protection

MODEL 565 D DIGITAL WEIGHT INDICATOR

OCSD Portable Dynamometer

FHC M Load Cell

FHC G Load Cell

Digital Dial With Posi- Drive Pointer

Model 565 D Digital Weight Indicator

Model C06 Pancake Load Cell

Model FHC 15K Pacman Load Cell

Model FHC LTX 150K Load Cell

Model FHC C05 Load Cell

MHD-47 Measuring Head

Measuring Wheels

DIGITAL DIAL WITH POSI- DRIVE POINTER

  • Resolution, sensitivity, and increments are user programmable
  • Low profile indicator uses minimal “dashboard” space
  • Responsive analog output (4-20mA or 0-5VDC) tracks the digital display
  • Output Ports provide multiple alarms for equipment shutdowns
  • Real time clock provides time and date with weight for computer interface
  • Field programmable for use with most strain gage load cells and transducers
  • High-speed sampling for quick and accurate response to weight changes
  • Over/High/Low alarm outputs for system overload protection

OCSD Portable Dynamometer

FHC M Load Cell

FHC G Load Cell

Digital Dial With Posi- Drive Pointer

Model 565 D Digital Weight Indicator

Model C06 Pancake Load Cell

Model FHC 15K Pacman Load Cell

Model FHC LTX 150K Load Cell

Model FHC C05 Load Cell

MHD-47 Measuring Head

Measuring Wheels

FHC M LOAD CELL

  • Slick-line load cell and compact wheel assembly installs easily into any system
  • Change lines easily without disconnecting from tool
  • Sheaves are interchangeable to accommodate different line sizes
  • Dual or single line sheaves available
  • Ultra sensitive load cell responds to even the smallest shift in load
  • Excellent performance in even the harshest climatic conditions

OCSD Portable Dynamometer

FHC M Load Cell

FHC G Load Cell

Digital Dial With Posi- Drive Pointer

Model 565 D Digital Weight Indicator

Model C06 Pancake Load Cell

Model FHC 15K Pacman Load Cell

Model FHC LTX 150K Load Cell

Model FHC C05 Load Cell

MHD-47 Measuring Head

Measuring Wheels

FHC G LOAD CELL

  • Wireline load cell and compact wheel assembly installs easily into any system
  • Change lines easily without disconnecting from tool
  • Sheaves are interchangeable to accommodate different line sizes
  • Dual or single line sheaves available
  • Ultra sensitive load cell responds to even the smallest shift in load
  • Excellent performance in even the harshest climatic conditions

OCSD Portable Dynamometer

FHC M Load Cell

FHC G Load Cell

Digital Dial With Posi- Drive Pointer

Model 565 D Digital Weight Indicator

Model C06 Pancake Load Cell

Model FHC 15K Pacman Load Cell

Model FHC LTX 150K Load Cell

Model FHC C05 Load Cell

MHD-47 Measuring Head

Measuring Wheels

MODEL C06 PANCAKE LOAD CELL

  • Compact, low profile compression style load cell
  • Some models can be used in tension and compression
  • Available with Solid, Hollow, or Threaded “Load Button”
  • Sealed against moisture and chemical attack
  • High accuracy and signal linearity
  • Custom designs available

OCSD Portable Dynamometer

FHC M Load Cell

FHC G Load Cell

Digital Dial With Posi- Drive Pointer

Model 565 D Digital Weight Indicator

Model C06 Pancake Load Cell

Model FHC 15K Pacman Load Cell

Model FHC LTX 150K Load Cell

Model FHC C05 Load Cell

MHD-47 Measuring Head

Measuring Wheels

MODEL FHC 15K PACMAN LOAD CELL

  • Custom designed to install directly into a “Gerhart Owen” style measuring head
  • Load cell is a direct replacement for older hydraulic style units
  • High sensitivity and excellent linearity provide years of trouble free operation
  • Eliminates cumbersome hydraulic hoses in the truck
  • Temperature compensated electronics are not affected by severe climate changes

OCSD Portable Dynamometer

FHC M Load Cell

FHC G Load Cell

Digital Dial With Posi- Drive Pointer

Model 565 D Digital Weight Indicator

Model C06 Pancake Load Cell

Model FHC 15K Pacman Load Cell

Model FHC LTX 150K Load Cell

Model FHC C05 Load Cell

MHD-47 Measuring Head

Measuring Wheels

MODEL FHC LTX 150K LOAD CELL

  • Line deflection style load cell
  • Mounts on deadline
  • Durable and weather resistant
  • Highly resistant to external noise
  • 4-20 mA output
  • A dielectric test was performed at 600 VAC on the load cell

OCSD Portable Dynamometer

FHC M Load Cell

FHC G Load Cell

Digital Dial With Posi- Drive Pointer

Model 565 D Digital Weight Indicator

Model C06 Pancake Load Cell

Model FHC 15K Pacman Load Cell

Model FHC LTX 150K Load Cell

Model FHC C05 Load Cell

MHD-47 Measuring Head

Measuring Wheels

MODEL FHC C05 LOAD CELL

  • Ruggedly built for harsh environments
  • All weather operation
  • Compatible with most digital weight indicators
  • Numerous industrial applications
  • Easy installation and connections
  • Custom designs and capacities available

OCSD Portable Dynamometer

FHC M Load Cell

FHC G Load Cell

Digital Dial With Posi- Drive Pointer

Model 565 D Digital Weight Indicator

Model C06 Pancake Load Cell

Model FHC 15K Pacman Load Cell

Model FHC LTX 150K Load Cell

Model FHC C05 Load Cell

MHD-47 Measuring Head

Measuring Wheels

OCSD PORTABLE DYNAMOMETER

  • Compact Design
  • Accuracy Class Up to 0.05%
  • Aluminium Load Cell for 1t to 5t
  • Alloy Steel Load Cell for 10t to 200t
  • 1” 5-digit LCD with Backlight
  • Peak-Hold feature
  • 2 Programmable Setpoints
  • Powered by 3 Standard AA Batteries
  • Optional Wireless Handheld Remote Display
  • Optional Wireless Remote Display with PC Connection via USB
  • Supplied with Shackles
  • One piece compact design

OCSD Portable Dynamometer

FHC M Load Cell

FHC G Load Cell

Digital Dial With Posi- Drive Pointer

Model 565 D Digital Weight Indicator

Model C06 Pancake Load Cell

Model FHC 15K Pacman Load Cell

Model FHC LTX 150K Load Cell

Model FHC C05 Load Cell

MHD-47 Measuring Head

Measuring Wheels

sheaves and accessories

materials | performance

  • Sheave is cast from 356.2 aluminum alloy
  • Heat treated and aged for strength
  • Steel components are made from 4140 alloy steel
  • Safe working load | 13,200 lbs
  • Proof load tested | 26,400lbs
  • Ultimate load to destruction
  • Assembly with steel tire weighs 54 lbs. Assembly with Nylatron Tire weighs 44lbs

Sheave Floor Stands

Wireline T- Clamp

Top Sheave Safety Axle Assembly

14” & 20” Sheave Ice Pick Assemblies

Derrick Staff

20” Everest- Lite Sheaveve

Features

14” Star – Lite Sheave

Materials | Performance

Features

Materials | Performance

14” STAR – LITE SHEAVE

view parts list

  • Easy swing loading shroud
  • Jumpless design will increase wireline life
  • Clevis freely swivels allowing the sheave to always run tangent to changing line angles
  • Hollow axle shaft to accommodate safety axle or fit a floor stand
  • Solid wheel halves prevent hand and feet injuries
  • Timkin races and bearings + oil seals + grease zerts
  • Identification plate is secured to wheel
  • Line sizes: 3/16”, 9/32”, 1/4”, 5/16”, 7/32”. *Other sizes available upon request
  • Easily field serviceable for routine maintenance
  • Recommended SKF grease LGMT 2/1* *DO NOT over grease as wheel will be hard to turn with over pressurized grease
  • Available with choice of steel or Nylatron tire (Reduces weight by 10lbs)

14” STAR – LITE SHEAVE

Sheave Floor Stands

Wireline T- Clamp

Top Sheave Safety Axle Assembly

14” & 20” Sheave Ice Pick Assemblies

Derrick Staff

20” Everest- Lite Sheaveve

Features

14” Star – Lite Sheave

Materials | Performance

Features

Materials | Performance

features

materials | performance

  • Sheave wheels + shroud are cast 356/2 alloy aluminum
  • Heat treated and aged for strength
  • 25,000 lbs safe work load
  • 50,000 lbs proof test

20” EVEREST- LITE SHEAVEVE

Sheave Floor Stands

Wireline T- Clamp

Top Sheave Safety Axle Assembly

14” & 20” Sheave Ice Pick Assemblies

Derrick Staff

20” Everest- Lite Sheaveve

Features

14” Star – Lite Sheave

Materials | Performance

Features

Materials | Performance

  • A solid wheel prevents injuries
  • Hollow axle shaft to accommodate safety axle or fit a floor stand
  • Jumpless design increases wireline life
  • Easily loaded by opening clevis truncheon pin
  • Timken bearings + races with oil seals + grease zerts
  • Clevis freely swivels allowing the sheave to always run tangent to changing line angle
  • The Nylatron tire insert lessens wireline wear + is sparkless
  • Available line sizes from 3/16” to 1”
  • Easily field serviceable for routine maintenance
  • Recommended grease is SKF- LGMT-21

features

Sheave Floor Stands

Wireline T- Clamp

Top Sheave Safety Axle Assembly

14” & 20” Sheave Ice Pick Assemblies

Derrick Staff

20” Everest- Lite Sheaveve

Features

14” Star – Lite Sheave

Materials | Performance

Features

Materials | Performance

14” & 20” SHEAVE ICE PICK ASSEMBLIES

  • Keeps sheave tire free of ice
  • Protects wireline from damage
  • Can be used as handle
  • No welding required
  • Easily installed

20” SHEAVE 

Sheave Floor Stands

Wireline T- Clamp

Top Sheave Safety Axle Assembly

14” & 20” Sheave Ice Pick Assemblies

Derrick Staff

20” Everest- Lite Sheaveve

Features

14” Star – Lite Sheave

Materials | Performance

Features

Materials | Performance

14” & 20” SHEAVE ICE PICK ASSEMBLIES

14” SHEAVE 

  • The slings are secured independently from the primary anchoring device
  • Can be used on other sheave brands that utilize a hollow axle
  • Due to the number of different configurations, the slings must be provided by the customer

20” EVEREST- LITE SHEAVEVE

Sheave Floor Stands

Wireline T- Clamp

Top Sheave Safety Axle Assembly

14” & 20” Sheave Ice Pick Assemblies

Derrick Staff

20” Everest- Lite Sheaveve

Features

14” Star – Lite Sheave

Materials | Performance

Features

Materials | Performance

  • Material Carbon Steel
  • Proof Load 85,000
  • Yield 92,000
  • Tensile 120,000

WIRELINE T- CLAMP

Sheave Floor Stands

Wireline T- Clamp

Top Sheave Safety Axle Assembly

14” & 20” Sheave Ice Pick Assemblies

Derrick Staff

20” Everest- Lite Sheaveve

Features

14” Star – Lite Sheave

Materials | Performance

Features

Materials | Performance

  • Use to safely secure the wireline over the well
  • Manufactured with dual or single line sizes from 3/16” to 1/2”
  • 75” hole on each corner allows the use of a shackle or clevis
  • The length is crucial to allow enough compression to surpass the line breaking strength without damaging the line

SAE | J429 | Grade 5
  • “T” clamps come in 2 lengths: 12” for lines 3/16” to 1/4” 16” for 7/16” to 1/2”
  • When all bolts are torqued to the manufacturer’s specifications, the wireline will not be compromised

DERRICK STAFF

Sheave Floor Stands

Wireline T- Clamp

Top Sheave Safety Axle Assembly

14” & 20” Sheave Ice Pick Assemblies

Derrick Staff

20” Everest- Lite Sheaveve

Features

14” Star – Lite Sheave

Materials | Performance

Features

Materials | Performance

  • Certified to 13,200 ft/lbs
  • Tested to 26,400 ft/lbs
  • Shank 14”
  • Cross members 10”
  • Carrying handle makes for easy transport
  • Compatible with 14” and 20” FHE sheaves
  • Identified by serial number
  • Made from 1048, 1 ¼” solid square bar stock

pumps

MISSION 2500 SUPREME CENTRIFUGAL PUMP

  • 1. Thick, strong concentric casing with replaceable casing wear pad provides extended life over conventional volute designs. The concentric design minimizes
  • turbulence and abrasive wear. The wear pad allows the casing to be repaired at a lower cost than replacing the entire casing.
  • 2. Wide semi open impeller creates lower axial thrust for improved bearing life. The semi open design reduces the concentration of solids behind the impeller extending the life of the mechanical seal or packing and stuffing box.
  • 3. Casing gasket recessed for protection. Replaceable stuffing box cover with dual stuffing box bolts.
  • 4. Optional stuffing-boxes available for single and double mechanical seal applications and can be
  • configured for flush lines.
  • 5. Long-life no-adjustment mechanical seal available for near zero leakage.
  • 6. Replaceable shaft sleeve prevents shaft wear.
  • 7. Single row roller bearings for increased bearing life.
  • 8. Oil lubrication for bearings is available upon request and
  • recommended for pump speeds in excess of 2400 RPM. Duplex angular contact bearings eliminate shaft end play and increase bearing and seal life.
  • 9. Labyrinth seals for maximum bearing protection are standard. Lip seals are recommended for oil- lubricated pumps.
  • 10. Optional flanged bearing housing available for hydraulic drive.
  • 11. External adjustments of impeller clearance extends pump performance life.
  • 12. Large heavy-duty shaft reduces deflection for longer life of packing and mechanical seals.Solid base offering rigidity and strength.
  • 13. Casing jack bolts simplify casing removal.
  • 14. Replaceable casing wear pad.
  • 15. Easy accessible front access drain.
  • 16. Back vanes reduce collection of solids at stuffing box and reduce box pressure.
  • 17. Smooth impeller eye for minimum turbulence and higher efficiency.
  • 18. Full pipe diameter entrance for minimum turbulence and maximum efficiency.
* Frank Henry services most pumps and carries a large inventory of parts!

Mud Hoppers & Mud Guns

Frank Henry Self- Priming Pump

Type “W” 1 1/7” Pump

Type “S” 1 1/8” Pump

Mission Versatile Drives & Mounting Options

Mission 2500 Supreme Centrifugal Pump

  • Please Note
All pumps are pressure tested and certified at Frank Henry’s shop before they are shipped.

 Thick, strong concentric casing with replaceable casing wear pad provides extended life over conventional volute The concentric design minimizes turbulence and abrasive wear. The wear pad allows the casing to be repaired at a lower cost than replacing the entire casing.
Wide semi open impeller creates lower axial thrust for improved bearing The semi open design reduces the concentration of solids behind the impeller extending the life of the mechanical seal or packing and stuffing box.
 
Casing gasket recessed for Replaceable stuffing box cover with dual stuffing box bolts.

MISSION VERSATILE DRIVES & MOUNTING OPTIONS

  • 4. Horizontal Diesel
  • Complete with full instrumentation, batteries and fuel
*Available upon request.
  • 3. Close Coupled | Space Saver Electric
  • Require the least amount of cubical space and eliminates coupling and alignment
  • 2. Direct Connect Unit
  • Fabricated on a steel rigid in line base, it uses more floor space than the Overhead version but provides a lower
  • 1 . Top Mount Belt Drive
  • Requires the least amount of floor space with its small foot Belts to the right are standard, to the left are a special order. Pump speed can be changed by changing sheave size.

Mud Hoppers & Mud Guns

Frank Henry Self- Priming Pump

Type “W” 1 1/7” Pump

Type “S” 1 1/8” Pump

Mission Versatile Drives & Mounting Options

Mission 2500 Supreme Centrifugal Pump

MUD HOPPERS & MUD GUNS

Mud Hoppers & Mud Guns

Frank Henry Self- Priming Pump

Type “W” 1 1/7” Pump

Type “S” 1 1/8” Pump

Mission Versatile Drives & Mounting Options

Mission 2500 Supreme Centrifugal Pump

  • Greater Head Recovery
  • High Shear & Low Pressure Assembly
  • Optional Size Hoppers
  • The rubber nozzle increases the life of the mud mixing pump by preventing large increases in mixing gun volume which often causes cavitation
  • The rubber nozzle increases nozzle life 10-20 times over mild steel
  • Offers maximum blending, agitation and pick up of settled solids
  • All swivel joints have grease fittings
  • Ball bearings and seals are easily replaced

FRANK HENRY SELF- PRIMING PUMP

Mud Hoppers & Mud Guns

Frank Henry Self- Priming Pump

Type “W” 1 1/7” Pump

Type “S” 1 1/8” Pump

Mission Versatile Drives & Mounting Options

Mission 2500 Supreme Centrifugal Pump

  • After initial priming, they will continue to re-prime automatically
  • A semi-open impeller design is ideal for trash and solids handling and will handle various types of pumpages
  • Solids handling will handle up to a 3” spherical solid
  • Unitized pumps are available with electric motor or engine driver
  • 17-4 PH Shafting
  • External shimless impeller / wear plate adjustment
  • Semi-cartridge mechanical seal
  • Removable cover plate
  • Viton O-Rings
  • Modular SAE mount available for 4”- 10” pump sizes
  • Removable rotating assembly

tubular

Tubing Pup Joints

Available in J55, K55, L80 and P110
Assorted weights
LTC, STC, BTC
Customer specific lengths

Accessories

API Couplings

Bull Plugs / Nipples

Swages / Crossovers

Tubing Pup Joints

crossover

1026, J55 and L80
Special orders are available to customer specifications

Accessories

API Couplings

Bull Plugs / Nipples

Swages / Crossovers

Tubing Pup Joints

Selection of 1026, J55 and L80
Special orders to customer specifications

SWAGES / CROSSOVERS

SWAGES

nipples

Pump seating nipples – 2-3/8” EUE to 5-1/2” LTC
Profile nipples

Accessories

API Couplings

Bull Plugs / Nipples

Swages / Crossovers

Tubing Pup Joints

Standard, heavy, extra heavy
Round nose, flat top or tapped with 1/2” NPT
J55 & L80
EUE, LTC, STC
Tubing/Casing
Large selection in stock
1026, J55, L80 and P110

BULL PLUGS / NIPPLES

pump seat nipples

BULL PLUGS

API COUPLINGS

Accessories

API Couplings

Bull Plugs / Nipples

Swages / Crossovers

Tubing Pup Joints

Standard API stock includes J55, L80 & P110
Sizes range from 1” to 13-3/8”
See the next page for specialty machining of couplings into sawtooth, re-entry and muleshoe that are available

ACCESSORIES

Accessories

API Couplings

Bull Plugs / Nipples

Swages / Crossovers

Tubing Pup Joints

Lift Nubbin
Re-Entry
Saw Tooth
Mule Tooth
Slip-On Coupling

wireline pressure control

Accessories

Tool Trap

Lubricator

Tool Trap

Pump In Sub

Stuffing Box

Dual 10K Packoff

Grease Injection Control Head

Bleed Sub / Injection Sub

5” 5K Wireline Valve

Wellhead Flanges

WIRELINE VALVES

Headcatcher

Spreader Bar Assembly

Lift Cap / Test Cap

  • 3” 10K Wireline Valve
  • 10K working pressure
  • 15K test pressure
  • H2S service
  • Manual or Hydraulic actuation
  • Stackable
  • Uses industry standard inner and outer seals
  • Pull rated to 200,000lbs
  • H2S Service

Wireline Valves

3” 10K Wireline Valve

3” 5K Wireline Valve

Accessories

Tool Trap

Lubricator

Tool Trap

Pump In Sub

Stuffing Box

Dual 10K Packoff

Grease Injection Control Head

Bleed Sub / Injection Sub

5” 5K Wireline Valve

Wellhead Flanges

WIRELINE VALVES -
3” 10K WIRELINE VALVE

Headcatcher

Spreader Bar Assembly

Lift Cap / Test Cap

  • 3” 10K Wireline Valve
  • 10K working pressure
  • 15K test pressure
  • H2S service
  • Manual or Hydraulic actuation
  • Stackable
  • Uses industry standard inner and outer seals
  • Pull rated to 200,000lbs
  • H2S Service

Wireline Valves

3” 10K Wireline Valve

3” 5K Wireline Valve

Accessories

Tool Trap

Lubricator

Tool Trap

Pump In Sub

Stuffing Box

Dual 10K Packoff

Grease Injection Control Head

Bleed Sub / Injection Sub

5” 5K Wireline Valve

Wellhead Flanges

WIRELINE VALVES -
3” 5K WIRELINE VALVE

Headcatcher

Spreader Bar Assembly

Lift Cap / Test Cap

  • 3” 5K Wireline Valve
  • 5K working pressure
  • 5K test pressure
  • Inter-changeable top and bottom subs for extended body life
  • Most industry standard connections available
  • 3” ID in body
  • Rams can be outfitted from slick line up to 1-1/2” coil
  • 2-1/2” NPT ports
  • Uses industry standard inner and outer 3” seals
  • Can be pull certified for 120,000lbs for fishing operations if needed
  • H2S service
  • Lightweight

Wireline Valves

3” 10K Wireline Valve

3” 5K Wireline Valve

Accessories

Tool Trap

Lubricator

Tool Trap

Pump In Sub

Stuffing Box

Dual 10K Packoff

Grease Injection Control Head

Bleed Sub / Injection Sub

5” 5K Wireline Valve

Wellhead Flanges

WIRELINE VALVES -
3” 5K WIRELINE VALVE

Headcatcher

Spreader Bar Assembly

Lift Cap / Test Cap

  • 5” 5K Wireline Valve
  • 5K working pressure
  • 5K test pressure
  • H2S service
  • Lightweight
  • Interchangeable top and bottom subs for extended body life
  • Most industry standard connections available
  • Uses industry standard 5” inner and outer seals
  • 5-1/8” ID in body
  • H2S Service
  • Rams can be outfitted from slickline up to 1-1/2’’ coil
  • external equalizer assembly with 2-1/2” NPT ports

Wireline Valves

3” 10K Wireline Valve

3” 5K Wireline Valve

Accessories

Tool Trap

Lubricator

Tool Trap

Pump In Sub

Stuffing Box

Dual 10K Packoff

Grease Injection Control Head

Bleed Sub / Injection Sub

5” 5K Wireline Valve

Wellhead Flanges

PUMP IN SUB

Headcatcher

Spreader Bar Assembly

Lift Cap / Test Cap

  • Up to 10,000 lbs Working Pressure
  • Available ID’s: 992” ID to 6.765” ID
  • Custom sizes available
  • Custom port configurations are available
  • Can be ordered as a stub flange assembly
  • Plug or ball valves are available separately
  • FHC can match most unions
  • H2S service

Wireline Valves

3” 10K Wireline Valve

3” 5K Wireline Valve

Accessories

Tool Trap

Lubricator

Tool Trap

Pump In Sub

Stuffing Box

Dual 10K Packoff

Grease Injection Control Head

Bleed Sub / Injection Sub

5” 5K Wireline Valve

Wellhead Flanges

TOOL TRAP

Headcatcher

Spreader Bar Assembly

Lift Cap / Test Cap

  • Up to 10,000 lbs Working Pressure
  • Available ID’s: 992” ID to 6.765” ID
  • Custom sizes available
  • Custom port configurations are available
  • Can be ordered as a stub flange assembly
  • Plug or ball valves are available separately
  • FHC can match most unions
  • H2S service

Wireline Valves

3” 10K Wireline Valve

3” 5K Wireline Valve

Accessories

Tool Trap

Lubricator

Tool Trap

Pump In Sub

Stuffing Box

Dual 10K Packoff

Grease Injection Control Head

Bleed Sub / Injection Sub

5” 5K Wireline Valve

Wellhead Flanges

LUBRICATOR

Headcatcher

Spreader Bar Assembly

Lift Cap / Test Cap

Standard lengths up to 10ft
Custom lengths available upon request
2-3/8” to 9-5/8” OD
Dual Seal and Slimline
Pressure rating up to 10,000 lbs
All designs isolate the threads from exposure to well fluids
Slimline is available to 5000 psi working pressure with either a standard or H2S service rating
Lightweight 3” 10k sanicro tubing
Union style is based on customer preference
Tested, banded & certified
H2S service

Wireline Valves

3” 10K Wireline Valve

3” 5K Wireline Valve

Accessories

Tool Trap

Lubricator

Tool Trap

Pump In Sub

Stuffing Box

Dual 10K Packoff

Grease Injection Control Head

Bleed Sub / Injection Sub

5” 5K Wireline Valve

Wellhead Flanges

STUFFING BOX

Headcatcher

Spreader Bar Assembly

Lift Cap / Test Cap

Standard lengths up to 10ft
Custom lengths available upon request
2-3/8” to 9-5/8” OD
Dual Seal and Slimline
Pressure rating up to 10,000 lbs
All designs isolate the threads from exposure to well fluids
Slimline is available to 5000 psi working pressure with either a standard or H2S service rating
Lightweight 3” 10k sanicro tubing
Union style is based on customer preference
Tested, banded & certified
H2S service

Wireline Valves

3” 10K Wireline Valve

3” 5K Wireline Valve

Accessories

Tool Trap

Lubricator

Tool Trap

Pump In Sub

Stuffing Box

Dual 10K Packoff

Grease Injection Control Head

Bleed Sub / Injection Sub

5” 5K Wireline Valve

Wellhead Flanges

DUAL 10K PACKOFF

Headcatcher

Spreader Bar Assembly

Lift Cap / Test Cap


10K working pressure
15K test pressure
3” 10K unions (standard). Others
1-3/4” through body
Uses industry standard bushings and rubbers
Balanced piston design
Stackable
Grease injection / drain port included
H2S service
 

Wireline Valves

3” 10K Wireline Valve

3” 5K Wireline Valve

Accessories

Tool Trap

Lubricator

Tool Trap

Pump In Sub

Stuffing Box

Dual 10K Packoff

Grease Injection Control Head

Bleed Sub / Injection Sub

5” 5K Wireline Valve

Wellhead Flanges

HEADCATCHER

Headcatcher

Spreader Bar Assembly

Lift Cap / Test Cap

10K working pressure
15K test pressure
3” 10K unions (standard)
1-3/4” through bore
Universal dogs 1” – 1-3/4” fishneck
Pull tested to 2000 pounds
Carrying handle
H2S service

Wireline Valves

3” 10K Wireline Valve

3” 5K Wireline Valve

call now